7.TopAccess
64 [Administration] Tab Page
6 Authentication Select the SASL authentication protocol. If you do not know the
authentication type, select [Auto].
Auto — Select this to access the LDAP server using the appropriate
authentication that this equipment detects.
Kerberos — Select this to access the LDAP server using the Kerberos
authentication.
Digest-MD5 — Select this to access the LDAP server using the Digest-MD5
authentication.
CRAM-MD5 — Select this to access the LDAP server using the CRAM-MD5
authentication.
Login — Select this to access the LDAP server using the login
authentication.
Plain — Select this to access the LDAP server using the plain
authentication.
Simple Bind — Select this to access the LDAP server using the Simple Bind
authentication.
7 Search Base Enter the search base. When you configure the Active Directory in Windows
server, make sure to enter this option. You can enter up to 256
alphanumerical characters and symbols other than ; (semicolon), #, and \
(backslash).
8 User Name Enter the log-in user name if a user name is required to access the directory
service. You can enter up to 256 alphanumerical characters and symbols.
9 Password Enter the password if required to access the directory service. You can enter
up to 32 alphanumerical characters and symbols.
10 Search Timeout Select the timeout period for quitting communication when no response is
received from the LDAP server. Specify within the range from 1 to 5. “1” is set
as the default.
11 Enable SSL/TLS Select whether the SSL (Secure Sockets Layer)/TLS (Transport Layer Security)
is enabled or disabled for communicating the LDAP directory service.
Disable — Select this to disable the SSL/TLS for communicating the LDAP
directory service.
Verify with imported CA certification(s) — Select this to enable the SSL/
TLS using the imported CA certificate.
Accept all certificates without CA — Select this to enable the SSL/TLS
without using imported CA certificate.
When [Verify with imported CA certification(s)] is selected, you must import the CA certificate in this
equipment.
If at least one of the registered LDAP directory services requires the SSL/TLS, you must enable the [Enable
SSL/TLS] option. When the [Enable SSL/TLS] option is enabled, this equipment will connect the registered
LDAP directory services using SSL/TLS first. Then if the connection fails using SSL/TLS, this will connect to
the registered LDAP directory service without using SSL/TLS. Therefore, even if you enable the [Enable SSL/
TLS] option, this equipment can also connect to an LDAP directory service that does not require the SSL/
TLS.
Not all operating systems support SSL/TLS for all protocols.
12 SSL/TLS Port Number Enter the port number to access the LDAP server using SSL/TLS. You can
enter a value in the range from 1 to 65535. Generally the default value “636” is
used.
Item name Description
To Next Page
Loading...
