3.INSTALLING PRINTER DRIVERS FOR WINDOWS
50 Installing the Printer Drivers
If your TOSHIBA MFP is not found
If your TOSHIBA MFP is not found, you must first install the printer driver by temporarily selecting a local port and then
configuring the Raw TCP/LPR port.
If this equipment is not discovered over the network after the installation is started, a dialog box indicating this
appears. Click [Continue] to continue the configuration.
7
Select [Use the following port] and then select “LPT1: ”. Then click [OK].
8
Click [Install].
9
Confirm that the installation is completed, and then click [Finish].
The Installer may ask you to restart your computer. If it does, select “Yes, I want to restart my computer now.”
and click [Finish] to restart your computer.
10
For the subsequent steps, follow the procedure from step 10 to step 19 on page 41 to page 44.
To Next Page
Loading...
