2 INSTALLING DRIVERS
14 Installing Drivers
10
Click [Finish].
11
After installing the printer driver, repeat steps 7 through 10 to install the N/W-Fax driver.
12
When you select [USB] in step 7: Make sure of the connection between the equipment
and the computer, turn on the equipment, and then click [Finish].
When you select [TCP/IP] in step 7: Click [Finish].
y When you use Windows 8, Windows 7, Windows Vista, Windows Server 2008, Windows Server 2008 R2,
Windows Server 2012, or when you use Windows XP, Windows Server 2003, Windows Server 2003 R2 and
select [TCP/IP], skip to step 17.
y When you use Windows XP, Windows Server 2003, or Windows Server 2003 R2 and select [USB], continue to
the next step. After you connect the equipment to your computer and turn it on, Windows will find new hardware
and start the wizard. The wizard works twice to install the scanner and printer drivers.
To Next Page
Loading...
