9.WHEN SOMETHING IS WRONG WITH THE EQUIPMENT
When You Think Something Is Wrong With the Equipment 77
WHEN SOMETHING IS WRONG WITH THE EQUIPMENT
The window “Enter
Department Code” appears.
The equipment is managed
under the department
management function.
Enter your department code. If you do not know
it, contact the administrator of the equipment.
The window “Enter the user
name and Password”
appears.
The equipment is managed
under the user management
function.
Enter your user name and password. If you do
not know them, contact the administrator of the
equipment.
A message is displayed on
the touch panel.
Some trouble occurred in the
equipment (or the message is
displayed just for an ordinary
operation).
See the meaning of the message referring to the
listing below.
To learn more about the messages displayed on
the touch panel, refer to the Hardware
Troubleshooting Guide.
The equipment reboots
automatically.
The auto-recovery function
works because a memory or
operation abnormality has been
detected.
Due to rebooting, the equipment has been
recovered to the normal condition. You can
operate the equipment as usual.
Problem Description Cause Corrective Action
To Next Page
Loading...
