3.HOW TO USE EDITING FUNCTIONS
Clearing Dark Parts Outside the Originals (Outside Erase) 97
HOW TO USE EDITING FUNCTIONS
4
Place the original on the original glass.
Press [ZOOM] and set the size of the original.
P.45 “Specifying both the original size and the copy paper size separately”
When placing the original, be sure that the Original Cover, the ADF is fully raised. If not, this function may not
properly be able to detect the border between the original and areas not belonging to it.
Do not directly look at the original glass during copying since an intense light may leak.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Breaking the glass could injure you.
To Next Page
Loading...
