7.TopAccess
[Administration] Tab Page 61
TopAccess
17 SMB Signing of SMB Client Select whether SMB Signing is enabled or disabled when this equipment
accesses the clients using SMB, such as when this equipment stores the
scanned data in the network folder using SMB.
If server agrees, digital signature is done for the communication. —
Select this to use the digital signature to secure the communication to an
SMB server only when the SMB Signing of SMB Server that this equipment
accesses is enabled. If the SMB Signing of SMB Server is disabled in an SMB
server, the communication is performed without the digital signature.
Digital signature is always done for the communication on the client
side. — Select this to make this equipment always access an SMB server
with a digital signature. When the SMB Signing of SMB Server is disabled in
an SMB server, the communication is not allowed.
Digital signature isn’ t done for the communication for the client. —
Select this to communicate to an SMB server without the digital signature.
If the SMB Signing of SMB Server is always enabled in an SMB server, the
communication is not allowed.
If you do not know whether the SMB Signing of SMB Server is enabled or disabled in the SMB servers, it is
recommended to select [If server agrees, digital signature is done for the communication.]. If this is set
incorrectly, the SMB communication may become unavailable.
The digital signature is always done for the communication on the server side as the default on Windows
Server 2008 or later. Therefore specify “If server agrees, digital signature is done for the communication.” or
“Digital signature is always done for the communication on the client side.” for SMB communications with
Windows Server 2008 or later.
Item name Description
To Next Page
Loading...
