7.TopAccess
[Administration] Tab Page 63
TopAccess
[Create LDAP Information]/[Edit LDAP Information] screen
You can display this screen by clicking a directory service name in the directly service list or the [New] button.
Item name Description
1 [Execute] button Tests the connection using the specified network settings to check if the
communications can be established.
2 Directory Service Name Enter the directory service name to identify the directory service. You can
enter up to 64 alphanumerical characters and symbols other than =, ;
(semicolon), #, and \ (backslash).
3 Server IP Address Enter the IP address or FQDN of the LDAP server. You can enter up to 128
alphanumerical characters and symbols.
4 Port Number Enter the port number to access the LDAP server. You can enter a value in the
range from 1 to 65535. Generally the default value “389” is used to access the
LDAP server without SSL/TLS. When the SSL/TLS is required, generally the
“636” port is used to access the LDAP server.
5 Server Type Select the LDAP server you want to use for LDAP authentication.
Windows Server — Select this when LDAP is running on a Windows server.
LDAP Server (Other than Windows Server) — Select this when the LDAP is
running on a server other than a Windows one.
1
2
3
4
5
11
10
9
8
7
6
12
15
14
13
To Next Page
Loading...
