3.THE INITIAL VALUES
20 Precautions on the Initial Values
[Network] Sub Menu
Item
Initial value for the high
security mode
Remarks
IPv6
Enable IPv6 Enable Be sure to change the value to “Disable”.
SMB
SMB Server Protocol Disable
HTTP
Enable SSL/TLS* Enable
WSD
Enable SSL/TLS Enable
Web Services Print Disable
Web Services Scan Disable
SMTP Server
Enable SMTP Server Disable
FTP Server
Enable FTP Server Disable
Enable SSL/TLS Enable
SMTP Client
Enable SSL/TLS Verify with imported CA
certification(s)
Authentication AUTO Be sure to confirm that one of “CRAM-MD5”,
“Digest-MD5”, “Kerberos” or “NTLM (IWA)” is
applied to your use environment.
POP3 Client
Enable POP3 Client Enable Be sure to change the value to “Disable”.
Enable SSL/TLS Verify with imported CA
certification(s)
FTP Client
SSL/TLS Setting Verify with imported CA
certification(s)
Bonjour
Enable Bonjour Disable
SNMP
Enable SNMP V1/V2 Disable
Enable SNMP V3 Enable
SLP
Enable SLP Disable
Syslog Setting
Enable Syslog Enable
Enable SSL/TLS Verify with imported CA
certification(s)
Severity - Error Enable
Severity - Warning Enable
Severity - Information Enable
To Next Page
Loading...
