Toshiba e-STUDIO2515AC - SIP Setting

3.THE INITIAL VALUES
22 Precautions on the Initial Values
[Printer] Sub Menu
[Print Service] Sub Menu
[ODCA] Sub Menu
[Security] Menu
[Authentication] Sub Menu
Item
Initial value for the high
security mode
Remarks
General Setting
Restriction for Print Job Only Hold
Item
Initial value for the high
security mode
Remarks
Raw TCP Print
Enable Raw TCP Disable
LPD Print
Enable LPD Disable
IPP Print
Enable SSL/TLS Enable
FTP Print
Enable FTP Printing Disable
Item
Initial value for the high
security mode
Remarks
Network
Enable Port Disable
Item
Initial value for the high
security mode
Remarks
User Authentication Setting
User Authentication Enable You cannot change the setting to “Disable”.
User Authentication
According to Function
Disable Do not change the setting to “Enable”.
Use Password
Authentication for Print
Job
Disable Do not change the setting to “Enable”.
Enable Guest User No check mark (Disable) The initial value is the same as in the Normal
Security Mode; however, it cannot be set to
“Enable”.
Authentication Type MFP Local Authentication
PIN Code Authentication Disable Do not change the setting to “Enable”.
Shared User Management Disable Do not change the setting to “Enable”.