3.OPERATING WITH A CLIENT COMPUTER
Managing Documents 55
OPERATING WITH A CLIENT COMPUTER
4
Select the following print options as required and click [Print].
Duplex — Select whether you want the document printed on both sides of the paper. You can select from Book
or Tablet.
Number of Copies — Enter the number of copies to be printed.
Sort Copies — Select this option to output the document separately for each copy.
Group Copies — Select this option to output the document separately for each page.
Rotate Sort Copies — Select this option to output the document by changing the output orientation of each
copy.
Paper Type — Select the type of paper desired.
Department Code — Enter the 1 to 63-digit department code, if required. You must enter the department
code to print a document if the department code is enabled on the equipment.
Project Code — Enter the 1 to 63-digit project code, if required. You must enter the project code to print a
document if the project code is enabled on the equipment.
Paper Source — Select the paper feed source. Select a paper source that correlates with the printing size.
Destination — Select the tray to which the document will be output.
Staple — Select whether the document is to be stapled or not. When you want to staple the document, select
how it will be done.
Binding — Select this option to output the document folded or stapled at the center. You can set how the
document is output.
- Center Fold — The document is folded at the center.
- Saddle Stitch — The document is double-stapled and folded at the center.
Hole Punch — Select whether the document is to be hole-punched or not. When you want to hole-punch the
document, select how it will be done.
To Next Page
Loading...
