Toshiba E-STUDIO3005AC User Manual (English)

Other manuals for Toshiba E-STUDIO3005AC

Scanning Guide66 pages

E-Filing Guide108 pages

Software Troubleshooting Guide82 pages

Hardware Troubleshooting Guide112 pages

Software Installation Guide164 pages

Questions and Answers:

R
robin53Jul 27, 2025
Why is the copied image from my Toshiba E-STUDIO3005AC All in One Printer too light?
- C
  Carl FischerJul 28, 2025
  If the copied image from your Toshiba All in One Printer is too light, it could be due to several reasons. First, the toner might be depleted; if you see a message like “Install new *** toner cartridge”, replace it. Another reason might be that the copy density is set too light; try darkening the density manually or using the automatic density mode. If you are copying an original printed with erasable blue toner on an e-STUDIO5008LP Series, ensure that you are using the [Blue Original] mode. Also, in the e-STUDIO5008LP Series, if you are performing black-and-white copying with [Thick] paper selected, try selecting [Thick 1] as the paper type.
D
Danielle SteeleAug 4, 2025
What to do if the copied image from my Toshiba E-STUDIO3005AC All in One Printer is too dark?
- T
  Terry HardyAug 4, 2025
  If the copied image from your Toshiba All in One Printer is too dark, it could be because the copy density is set too dark. Try lightening the density manually or using the automatic density mode. Also, if you're copying an original printed with black toner on an e-STUDIO5008LP Series, make sure the original mode is set to something other than [Blue Original].
G
George ChambersAug 12, 2025
What to do if my Toshiba All in One Printer stops copying due to insufficient workspace?
- D
  David LynchAug 12, 2025
  If your Toshiba All in One Printer stops copying during scanning and displays the message “Not enough Work Space to store originals. Will you print out stored originals?”, it means the printer's internal memory is full. To proceed with copying the scanned images, press [Yes]. If you want to cancel the copying process, press [No].
E
Elizabeth MartinezAug 18, 2025
Why does my Toshiba E-STUDIO3005AC All in One Printer stop copying and say the number of originals exceeds the limits?
- M
  Marc BrownAug 19, 2025
  If your Toshiba All in One Printer stops copying and shows the message “The number of originals exceeds the limits. Will you print out stored originals?”, it means you've reached the maximum number of pages that can be scanned. To copy the scanned images, press [Yes]. To cancel the operation, press [No].

Toshiba E-STUDIO3005AC Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	100, 000 pages
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Copy Speed (Black)	30 cpm
Copy Speed (Color)	30 cpm
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Paper Size	A4, A5, Legal, Letter
Connectivity	USB, Ethernet, Wi-Fi
Scanner Type	Flatbed, ADF
Operating System Compatibility	Windows, macOS, Linux