8.Install Disc
100 Installing the printer drivers by using the individual installers
7
Click [Finish].
The Installer may ask you to restart your computer. If it does, select “Yes, I want to restart my computer now.”
and click [Finish] to restart your computer.
You can set the printer driver and print settings which are required in order to perform test page printing or
normal printing from this equipment. Click the buttons shown below to set them as needed. Setting can be
made even after [Finish] has been clicked.
- Show the readme file: When you select this check box, the Readme file is opened after [Finish] is clicked.
- [Open Printer Preferences]: The [Printer Preferences] dialog box of the installed printer driver is
displayed.
For details about the setting, refer to the Printing Guide.
- [Print Test Page]: Print the test page from this equipment.
- [Open Printer Properties]: The [Printer Properties] dialog box is displayed.
For details about the setting, refer to the Printing Guide.
To Next Page
Loading...
