7.TopAccess
66 [Administration] Tab Page
VNC Setting
You can use a computer or a mobile terminal such as a tablet and a smartphone to check and operate the control
panel.
The default password for this VNC function is “d9kvgn”. Be sure to change it before using this function. Specify a
password with six or more and eight or less alphanumeric letters.
You can use only one computer or mobile terminal for the VNC function.
It is recommended that you use UltraVNC (client software) on Windows 8.1 or later for the VNC function.
When this VNC function is enabled, the equipment does not enter the Super Sleep mode.
Item name Description
1 Enable VNC Function Select whether the VNC function is enabled or disabled.
Enable — Enables the VNC function.
Disable — Disables the VNC function.
2 Old Password Enter the old password for the VNC function.
3 New Password Enter a new password for the VNC function.
4 Retype Password Retype the new password for the VNC function.
5 Enable SSL/TLS Select whether the SSL (Secure Sockets Layer)/TLS (Transport Layer Security)
is enabled or disabled for the VNC function.
Enable — Enables the VNC function.
Disable — Disables the VNC function.
To Next Page
Loading...
