7.TopAccess
68 [Administration] Tab Page
5 Server Name When you select [FTP] as the protocol, enter the FTP server name or IP
address where a scanned file will be sent. For example, to send a scanned file
to the “ftp://192.168.1.1/user/scanned” FTP folder in the FTP server, enter
“192.168.1.1” in this box.
When you select [NetWare IPX/SPX] as the protocol, enter the NetWare file
server name or Tree/Context name (when NDS is available).
When you select [NetWare TCP/IP] as the protocol, enter the IP address of the
NetWare file server.
You can enter up to 64 alphanumerical characters and symbols.
6 Port Number(Command) Enter the port number to be used for controls if you select [FTP] as the
protocol. Generally “-” is entered for the control port. When “-” is entered, the
default port number, that is set for FTP Client by an administrator, will be
used. If you do not know the default port number for FTP Client, ask your
administrator and change this option if you want to use another port number.
You can enter a value in the range from 0 to 65535 using numbers and
hyphens (-). “-” is set as the default.
7 Network Path When you select [SMB] as the protocol, enter the network path to the network
folder. For example, to specify the “users\scanned” folder in the computer
named “Client01”, enter “\\Client01\users\scanned”.
When you select [FTP] as the protocol, enter the directory in the specified FTP
server. For example, to specify the “ftp://192.168.1.1/user/scanned” FTP
folder in the FTP server, enter “user/scanned”.
When you select [NetWare IPX/SPX] or [NetWare TCP/IP] as the protocol,
enter the folder path in the NetWare file server. For example, to specify the
“sys\scan” folder in the NetWare file server, enter “\sys\scan”.
You can enter up to 128 alphanumerical characters and symbols.
8 Login User Name Enter the log-in user name to access an SMB server, an FTP server, or a
NetWare file server, if required. When you select [FTP] as the protocol, an
anonymous log-in is assumed if you leave this box blank.
You can enter up to 32 alphanumerical characters and symbols other than <,
>, " (double quotation), : (colon) and ; (semicolon). A user name with only a
single space is not possible.
9 Password Enter the password to access an SMB server, an FTP server, or a NetWare file
server, if required. You can enter up to 32 alphanumerical characters,
symbols, and spaces. A single space only can also be entered.
10 Retype Password Enter the same password again for a confirmation.
11 [Execute] button Tests the connection using the specified network settings to check if the
communications can be established.
Item name Description
To Next Page
Loading...
