7.TopAccess
[Administration] Tab Page 73
TopAccess
Setting up FTP Print
In FTP Print, you can set the FTP Print options to enable the FTP print service.
6 SSL/TLS Port Number Enter the port number for SSL/TLS. You can enter a value in the range from 1
to 65535. Generally the default value “631” is used.
The same port numbers as the ones for the following settings are not usable.
Change the applicable port number before that for the SSL/TLS Port Number is set.
HTTP Network Service / Primary Port Number
HTTP Network Service / Secondary Port Number
HTTP Network Service / SSL/TLS Port Number
7 SSL/TLS URL Display the SSL/TLS URL for IPP printing. You cannot change the SSL/TLS URL
for IPP printing. This SSL/TLS URL should be set as the print port when users
set up the printer driver for IPP printing if the SSL/TLS for IPP printing is
enabled.
8 Printer Name Enter the printer name for IPP printing. You can enter up to 127
alphanumerical characters and symbols other than =, ; (semicolon), #, and \
(backslash). The MFP name is set as the default.
9 Authentication Enable or disable the authentication for creating the IPP queue on the client
computers. When this is enabled, the dialog box to enter a user name and
password will be displayed when a user creates the IPP print port.
Disable — Select this to disable the authentication.
Basic — Select this to enable the authentication.
When IPP printing is used for printing from the Mac OS printer driver (PPD), do not enable the authentication.
The Mac OS printer driver (PPD) does not support the authentication for IPP printing.
10 User Name Enter the user name when the Authentication option is enabled. Users must
enter this user name to create an IPP queue on the client computers. You can
enter up to 127 alphanumerical characters and symbols other than =, ;
(semicolon), #, @, and \ (backslash).
11 Password Enter the password when the Authentication option is enabled. Users must
enter this password to create an IPP queue on the client computers. You can
enter up to 127 alphanumerical characters and symbols other than =, ;
(semicolon), #, and \ (backslash). “password” is set as the default.
Item name Description
1 Enable FTP Printing Enable or disable FTP print service. [Disable] is set as the default.
2 Print User Name Enter the user name if you want to request the log-in user name from
someone who attempts FTP printing. You can enter up to 31 alphanumerical
characters and symbols other than =, ; (semicolon), #, and \ (backslash). If you
leave this box blank, the default user name “Print” is used.
Item name Description
To Next Page
Loading...
