4 INSTALLING PRINTER DRIVERS FOR MACINTOSH
162 Installing the Printer on Mac OS X 10.4.x to Mac OS X 10.10.x
Model Selection
TOSHIBA e-STUDIO6570CSeries — Select this when the e-STUDIO5560C/6560C/6570C is used.
TOSHIBA e-STUDIO6550CSeries — Select this when the e-STUDIO5540C/6540C/6550C is used.
TOSHIBA e-STUDIO4540CSeries — Select this when the e-STUDIO2040C/2540C/3040C/3540C/
4540C is used.
TOSHIBA e-STUDIO2550CSeries — Select this when the e-STUDIO2050C/2550C is used.
TOSHIBA e-STUDIO5055CSeries — Select this when the e-STUDIO2555C/3055C/3555C/4555C/
5055C or e-STUDIO2555CSE/3055CSE/3555CSE/4555CSE/5055CSE is used.
TOSHIBA e-STUDIO507Series — Select this when the e-STUDIO207L/257/307/357/457/507 is used.
TOSHIBA e-STUDIO456Series — Select this when the e-STUDIO206L/256/306/356/456/506 or
e-STUDIO256SE/306SE/356SE/456SE/506SE is used.
TOSHIBA e-STUDIO857Series — Select this when the e-STUDIO557/657/757/857 is used.
TOSHIBA e-STUDIO856Series — Select this when the e-STUDIO556/656/756/856 or
e-STUDIO556SE/656SE/756SE/856SE is used.
TOSHIBA e-STUDIO407CS Series — Select this when the e-STUDIO287CS/287CSL/347CS/
347CSL/407CS is used.
TOSHIBA e-STUDIO527S Series — Select this when the e-STUDIO477S/477SL/527S is used.
Loops-LP301_e-STUDIO307LP — Select this when the e-STUDIO307LP is used.
Loops-LP30_e-STUDIO306LP — Select this when the e-STUDIO306LP is used.
Finisher
Not Installed — Select this if a finisher is not installed.
Hanging Finisher — Select this when the Hanging Finisher is installed. (Only for the e-STUDIO4540C
Series)
Saddle Stitch Finisher — Select this when the Finisher or Saddle Stitch Finisher is installed.
Saddle Stitch Finisher and Hole Punch — Select this when the Finisher or Saddle Stitch Finisher and
Hole Punch unit are installed.
Job Separator — Select this when the Job Separator is installed. (Only for the e-STUDIO507 Series,
e-STUDIO456 Series, e-STUDIO307LP and e-STUDIO306LP)
Offset Tray — Select this when the Offset Tray is installed. (Only for the e-STUDIO507 Series,
e-STUDIO456 Series)
Inner Finisher (2 Trays) — Select this when the Inner Finisher (2 Trays) is installed. (Only for the
e-STUDIO2550C Series and e-STUDIO5055C Series)
Inner Finisher (1 Tray) — Select this when the Inner Finisher (1 Tray) is installed. (Only for the
e-STUDIO407CS Series, e-STUDIO527S Series)
Even if you choose [Not Installed] for the Finisher option during print settings, the finisher options
such as stapling and hole punching can be selected. If you select the finisher options for printing but
the finisher is not installed, finisher settings will be ignored and printing will be performed correctly.
Drawers
Drawer 1 — Select this when the drawer 1 is installed.
Drawer 1 & LCF — Select this when the drawer 1 and LCF are installed.
Drawer 1 & Drawer 3 — Select this when the drawer 1 and 3 are installed.
Drawer 1 & Drawer 3, 4 — Select this when the drawer 1, 3 and 4 are installed.
Drawer 1 & Drawer 2 — Select this when the drawer 1 and 2 are installed.
Drawer 1, 2 & LCF — Select this when the drawer 1, 2 and LCF are installed.
Drawer 1, 2 & Drawer 3 — Select this when the drawer 1, 2 and 3 are installed.
Drawer 1, 2 & Drawer 3, 4 — Select this when the drawer 1, 2, 3 and 4 are installed.
The Large Capacity Feeder is not available for some countries or regions.
External LCF (Only for the e-STUDIO6570C Series, e-STUDIO6550C Series, e-STUDIO857 Series
and e-STUDIO856 Series)
Not Installed — Select this when no External Large Capacity Feeder is installed.
Installed — Select this when the External Large Capacity Feeder is installed.
Harddisk (Only for the e-STUDIO2550C Series)
Select this check box when this option is installed.
To Next Page
Loading...
Need help?
General
