2.SETTING ITEMS (ADMIN)
NETWORK 81
2 SETTING ITEMS (ADMIN)
Setting the IPv6 protocol manually
1
On the IPv6 screen, specify the following items as required and press .
The link-local address cannot be used to connect to network places across a router.
[ENABLE] and [DISABLE] for the LLMNR protocol are available when you select [ENABLE] for the IPv6
protocol.
2
Specify the following items as required and press .
When you press [IP Address], [PREFIX] or [GATEWAY], the on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following page:
P.154 “On-screen keyboard”
Item name Description
IPv6 PROTOCOL ENABLE — Press this button to enable the IPv6 protocol.
DISABLE — Press this button to disable the IPv6 protocol.
LLMNR ENABLE — Press [ENABLE] to enable the LLMNR (Linklocal Multicast Name Resolution)
protocol.
DISABLE — Press [DISABLE] to disable the LLMNR protocol.
ADDRESS MODE Select [MANUAL] for the IPv6 addressing mode.
Link Local Address The unique address used in IPv6 is displayed.
Item name Description
ENABLE DHCP
(OPTIONS)
Select whether or not to use the optional information (IPv6 address for the DNS server, etc.) other
than the IPv6 address for this equipment issued by the DHCPv6 server.
ENABLE — Press this button to use the optional information.
DISABLE — Press this button to not use the optional information.
IP Address Press this button to assign an IPv6 address to this equipment.
PREFIX Press this button to assign the prefix for the IPv6 address.
GATEWAY Press this button to assign the default gateway.
To Next Page
Loading...
Need help?
General
