Toshiba E-STUDIO4508A - Page 66

7.TopAccess
66 [Administration] Tab Page
 VNC Setting
You can use a computer or a mobile terminal such as a tablet and a smartphone to check and operate the control
panel.
 The default password for this VNC function is “d9kvgn”. Be sure to change it before using this function. Specify a
password with six or more and eight or less alphanumeric letters.
 You can use only one computer or mobile terminal for the VNC function.
 It is recommended that you use UltraVNC (client software) on Windows 8.1 or later for the VNC function.
 When this VNC function is enabled, the equipment does not enter the Super Sleep mode.
Item name Description
1 Enable VNC Function Select whether the VNC function is enabled or disabled.
 Enable — Enables the VNC function.

Disable — Disables the VNC function.
2 Old Password Enter the old password for the VNC function.
3 New Password Enter a new password for the VNC function.
4 Retype Password Retype the new password for the VNC function.
5 Enable SSL/TLS Select whether the SSL (Secure Sockets Layer)/TLS (Transport Layer Security)
is enabled or disabled for the VNC function.
 Enable — Enables the VNC function.

Disable — Disables the VNC function.
1
2
3
4
5