Toshiba E-studio4555c - Finisher

Chapter 6 INFORMATION ABOUT EQUIPMENT
72
e-STUDIO2555C/3055C/3555C/4555C/5055C,
e-STUDIO2555CSE/3055CSE/3555CSE/4555CSE/5055CSE Specications
Model name FC-2555C/FC-3055C/FC-3555C/FC-4555C/FC-5055C
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fixing method External IH belt fusing
Photosensor type OPC
Original scanning system
Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed scanning system by
feeding the original)
Original scanning sensor Linear CCD sensor
Scanning light source LED
Resolution
Scanning 600 dpi x 600 dpi
Writing Color and black-and-white (grayscale): 600 dpi x 600 dpi, 5 bits
Acceptable originals Sheets, books
Acceptable original size Max. A3 or LD
Acceptable copy
paper size
Drawer
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 305 mm x 457 mm, 320 mm x 450 mm, 320 mm x 460
mm, LD, LG, LT, LT-R, ST-R, COMP, 13"LG, 8.5" SQ, 12" x 18", 8K, 16K, 16K-R
Bypass
Paper size within 100 - 320 mm (5.5" - 12.6") (length), 148 - 460 mm (8.5" - 18.1") (width)
(For printing functions, within 461 - 1200 mm (18.15" - 47.24") (length)
*1
)
Acceptable copy
paper weight
Drawer 60 - 256 g/m
2
(16 lb. Bond - 80 lb. Cover (140 lb. Index))
Bypass
Single paper feed: 52 - 280 g/m
2
(14 lb. Bond - 100 lb. Cover (150 lb. Index))
Continuous paper feed: 60 - 280 g/m
2
(16 lb. Bond - 100 lb. Cover (150 lb. Index))
Warm-up time Approx. 27 seconds
First copy time
(A4 or LT
portrait)
Black-and-white
e-STUDIO2555C/3055C/3555C, e-STUDIO2555CSE/3055CSE/3555CSE: 6.4 seconds
e-STUDIO4555C/5055C, e-STUDIO4555CSE/5055CSE: 4.7 seconds
Color
e-STUDIO2555C/3055C/3555C, e-STUDIO2555CSE/3055CSE/3555CSE: 8.1 seconds
e-STUDIO4555C/5055C, e-STUDIO4555CSE/5055CSE: 6.1 seconds
Continuous copy speed Refer to the Copying Guide.
Multiple copying Up to 999 sheets (digital key entry)
Excluded image
width
*2
Black-and-white
Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17" + 0.11" - 0.05"),
Trailing edge: 3.0±2.0 mm (0.12"±0.08"),
Both edges: 2.0±2.0 mm (0.08"±0.08")
Color
Leading edge: 5.0 mm ± 2.0 mm (0.20"±0.08"),
Trailing edge: 3.0±2.0 mm (0.12"±0.08"),
Both edges: 2.0±2.0 mm (0.08"±0.08")
Printer (Black-
and-white/Color)
Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17" + 0.11" - 0.05"),
Trailing edge: 4.2 mm +1.2 mm - 2.8 mm (0.17" + 0.05" - 0.11"),
Both edges: 4.2±2.0 mm (0.17"±0.08")
Reproduction
ratio
Actual size 100±0.5%
Zoom
25 - 400% (in 1% increments)
For the Reversing Automatic Document Feeder 25 - 200% (in 1% increments)
Paper supply
Drawer Approx. 550 sheets (80 g/m
2
, 20 lb. Bond)
Bypass Approx. 100 sheets (80 g/m
2
, 20 lb. Bond)
Exit tray loading capacity Approx. 400 sheets (80 g/m
2
, 20 lb. Bond)
Toner density adjustment Magnetic auto-toner system + Pixel count system
Exposure control Automatic plus manual selection from 11 exposure step
USB interface USB 2.0 (Hi-Speed)
Environment (for normal use) Temperature: 10 - 30 °C (50 - 86 °F), Humidity: 20 - 85% (No Condensation)
Power requirements and Power
consumption
(including optional equipments)
AC 220-240 V±10%, 8 A (50/60 Hz): 1.6 kW or less
AC 120 V±10%, 12 A (50/60 Hz): 1.5 kW or less
Dimensions (equipment only)
585 mm (23.0") (W) x 644 mm (25.4") (D) x 787 mm (31.0") (H) (At 90 degrees of the control
panel angle)
585 mm (23.0") (W) x 762 mm (30.0") (D) x 787 mm (31.0") (H) (At 7 degrees of the control
panel angle)
Weight
Approx. 75 kg (165.3 lb.) (equipment including developer and drum)
Space occupied (equipment only) 981 mm (38.6") (W) x 806 mm (31.7") (D) (At 7 degrees of the control panel angle)
Storage capacity Max. 1000 sheets or until the memory is full (Toshiba's own chart)
• This specication varies depending on the printing conditions and the environment.
• Specications and appearance are subject to change without notice in the interest of product improvement.
*1 Sheets of paper longer than 461 mm (18.15”) are printed in 300 dpi resolution.
*2 When the paper size is A3/LD or smaller.