Basic Menu of the Copier Function 11
BEFORE MAKING COPIES
0.Basic Menu of the Copier Function
The BASIC menu for the copier function shows the following information:
1. Function display
The function being used, such as copying, is displayed.
2. Message indication area
This shows a brief description of the functions or the current status of this equipment in message form.
3. Equipment status indication area ( P.13)
This shows the size, paper type or amount of paper remaining in each drawer.
4. Index tabs (BASIC, EDIT, IMAGE)
These are for switching between the menus of “BASIC”, “EDIT” and “IMAGE”.
5. Alert message indication area
This shows alert messages such as the replacement timing of the toner cartridges or the waste toner box.
6. [APS] (automatic paper selection) button ( P.27)
This is for changing the mode to automatic paper selection.
7. [ZOOM] button ( P.43)
This is for changing the reproduction ratio of images.
8. [2-SIDED] button ( P.62)
This is for selecting simplex/duplex copying (e.g. 1 -> 2-sided, 2 -> 2-sided).
9. [FINISHING] button ( P.54)
This is for selecting a sorting mode.
10. [ORIGINAL MODE] button ( P.67)
This is for selecting an original mode.
11. Date and time
5
4
2
1
3
2425 23 22 21 20
17
18
19
14
13
16
15
10 126 987 11
To Next Page
Loading...
Need help?
General
