3.OPERATING WITH A CLIENT COMPUTER
58 Managing Documents
You can also perform test printing by selecting a document in the Document frame and then selecting [File] >
[Test Print]. However, you cannot print individual pages, even if you select the check boxes of the pages
displayed in the Contents frame.
4
Select whether to print all pages of the document or only specified pages and click [Print].
All Pages — Select this option to print all pages of the document.
[first page number] - [last page number] Pages — Select this option to specify the pages to be printed. When
this option is selected, enter the numbers of first page and last page to be printed in each box.
Department Code — Enter a department code. This must be entered only when the department code is
enabled on the equipment.
Project Code — Enter a project code. This must be entered only when the project code is enabled on the
equipment.
When both the user management and department management settings are enabled, the quotas that are
allowed for the department and user will be displayed in the upper right-hand area of the page.
Clicking [Print] prints one copy of the document and the print result window is displayed.
Clicking [Cancel] closes the Test Print window without printing.
5
Click [Close] to return to the [Documents] tab page.
When you want to cancel a job before printing is complete, access TopAccess, click the [Job Status] tab > [Print],
select the job and press [Delete].
To Next Page
Loading...
