Chapter 6 INFORMATION ABOUT EQUIPMENT
76
e-STUDIO206L/256/306/356/456, e-STUDIO256SE/306SE/356SE/456SE Speci cations
Model name DP-2095/DP-2530/DP-3020/DP-3590/DP-4590
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fixing method
e-STUDIO206L/256/306: Halogen lamp (2 pieces)
e-STUDIO356/456: Halogen lamp (3 pieces)
Photosensor type OPC
Original scanning system
Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed scanning system by
feeding the original)
Original scanning sensor Linear CCD sensor
Scanning light source LED lamp
Resolution
Scanning 600 dpi x 600 dpi
Writing 2400 dpi x 600 dpi (Smoothing process)
Acceptable originals Sheets, books and 3-dimensional objects
Acceptable original size Max. A3 or LD
Acceptable copy
paper size
Drawer
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP, 13”LG, 8.5”SQ, 8K, 16K,
16K-R
Bypass
Paper size within 100 - 297 mm (3.94" - 11.69") (Length),
148 - 432 mm (5.83" - 17.01") (Width)
Acceptable copy
paper weight
Drawer 64 - 105 g/m
2
(17 - 28 lb. Bond)
Bypass
64 - 209 g/m
2
(17 lb. Bond - 110 lb. Index) (for continuous feed)
52 - 209 g/m
2
(14 lb. Bond - 110 lb. Index) (for single feed)
64 - 105 g/m
2
(17 - 28 lb. Bond) (When the automatic duplexer is used.)
Warm-up time Approx. 20 seconds
First copy time
(A4 or LT portrait)
e-STUDIO206L/256/306, e-STUDIO256SE/306SE: Approx. 4.7 seconds
e-STUDIO356/456, e-STUDIO356SE/456SE: Approx. 3.7 seconds
Continuous copy speed Refer to the Copying Guide.
Multiple copying Up to 999 sheets (digital key entry)
Excluded image
width
Copy
Leading edge: 3.0 mm + 2.0 mm / -1.0 mm (0.12” + 0.08” / -0.04”),
Trailing edge: 2.0±2.0 mm (0.08”±0.08”),
Both edge: 2.0±2.0 mm (0.08”±0.08”)
Printer
Leading edge: 4.2±2.0 mm (0.17”±0.08”),
Trailing edge: 4.2±2.0 mm (0.17”±0.08”),
Both edge: 4.2±2.0 mm (0.17”±0.08”)
Reproduction
ratio
Actual size 100±0.5%
Zoom
25 - 400% (in 1% increments)
For the Reversing Automatic Document Feeder 25 - 200% (in 1% increments)
Paper supply
Drawer Approx. 550 sheets (80 g/m
2
,
20 lb. Bond)
Bypass Approx. 100 sheets (80 g/m
2
, 20 lb. Bond)
Exit tray loading capacity Approx. 500 sheets (80 g/m
2
, 20 lb. Bond)
Toner density adjustment Magnetic auto-toner system
Exposure control Automatic plus manual selection from 11 exposure step
USB interface USB 2.0 (Hi-Speed)
Environment (for normal use) Temperature: 10 ° - 30 °C (50 ° - 86 °F), Humidity: 20 - 85% (No Condensation)
Power requirements and Power
consumption
(including optional equipments)
AC 220-240 V±10%, 8 A (50/60 Hz): 1.6 kW or less
AC 115 V±10%, 12 A (50/60 Hz): 1.5 kW or less
AC 127 V±10%, 12 A (50/60 Hz): 1.5 kW or less (for Saudi Arabia 100 V version only)
Dimensions (equipment only) 575 mm (22.6”) (W) x 586 mm (23.1”) (D) x 756 mm (29.8”) (H)
Weight
e-STUDIO206L/256/306, e-STUDIO256SE/306SE: Approx. 59 kg (130.1 lb.)
e-STUDIO356/456, e-STUDIO356SE/456SE: Approx. 62.5 kg (137.8 lb.) (equipment including
developer and drum)
Space occupied (equipment only) 889 mm (35”) (W) x 586 mm (23.1”) (D)
Storage capacity Max. 1000 sheets or until the memory is full (Toshiba’s own chart)
• This speci cation varies depending on the printing conditions and the environment.
• Speci cations and appearance are subject to change without notice in the interest of product improvement.
To Next Page
Loading...
Need help?
General
