Need help?Do you have a question about the Toshiba E-STUDIO600 and is the answer not in the manual?
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Speed | 60 ppm |
| Copy Speed | 60 cpm |
| Fax Capability | Yes |
| Duplex Printing | Yes |
| Connectivity | Ethernet, USB 2.0 |
| Scanner Type | Flatbed |
Adjusts the auto-toner sensor when the developer material is replaced.
Adjusts items for image dimensional accuracy like paper alignment and printer/scanner related settings.
Adjusts density settings for scanned images to improve quality.
Adjusts paper feeding system components to correct sheet sideways deviation.
Adjusts fuser roller pressure and temperature settings to improve fusing performance.
Adjusts RADF position, height, and skew for proper paper handling.
Adjusts finisher components like height sensor, alignment, and staple position.
Adjusts sensor output and registers the number of punch holes for the hole punch unit.
Adjusts tray guide width and checks sensor operations for the inserter unit.
Provides step-by-step troubleshooting guidance for various error codes.
Troubleshooting steps for paper jams in different transport sections.
Troubleshooting steps for paper misfeeding issues in various sections.
Troubleshooting steps for paper jams occurring in the finisher unit.
Diagnoses and resolves service calls related to paper feeding system abnormalities.
Addresses abnormalities related to the fuser unit, such as thermistor and heater issues.
Troubleshooting for issues related to the laser optical unit, like polygonal motor abnormality.
Guides on diagnosing and correcting image quality issues like pattern errors and density problems.
Procedures and cautions for replacing essential hardware components like PC boards and the HDD.
Steps and precautions for backing up and replacing the Hard Disk Drive.
Procedures for updating firmware using a dedicated download jig.
Procedures for updating firmware using a USB storage device.
Details the various output voltage channels from the main switch and cover switch lines.
Identifies fuse locations and types for troubleshooting power supply issues.
Automates toner and used toner container ordering via FAX or E-mail.
Notifies service technicians about equipment status and errors via E-mail or FAX.
Explains the process of backing up and restoring equipment data using a USB storage device.
Detailed steps for backing up user data, settings, and SRAM data.
Detailed steps for restoring backed-up data to the equipment.
Provides the wiring diagram for AC power connections to various components.
Details the DC wire harness connections for all internal components.
To Next Page