e-STUDIO520/600/720/850 REMOTE SERVICE March 2005 © TOSHIBA TEC
8 - 4
*1 The order is placed when the number of replacement reaches the number specified for the
CONDITION.
- E-mail information of this equipment (common information)
[ADMIN] > [E-MAIL]
*1 When sending an E-mail, validity of the address is checked. If the address is invalid, it is not
sent.
- FAX number of this equipment (common information)
[ADMIN] > [FAX] > [TERMINAL ID]
3) Output of setting list of the Auto Supply Order
Keying in the following buttons and keys prints the setting list.
[USER FUNCTIONS] [USER] [LISTS] [*] [#] [*] [*] [3] [8] [START]
8.1.3 Setting procedure
(1) Start up the self-diagnosis setting mode 08-765, and then change the setting value to “0”.
(2) Turn the power OFF, and then ON.
(3) Press the [USER FUNCTIONS] button to enter the user function screen.
FROM ADDRESS E-mail address of this equipment (*1)
FROM NAME E-mail username of this equipment
ID NAME ID name of this equipment
FAX NUMBER FAX number of this equipment
To Next Page
Loading...
