e-STUDIO520/600/720/850 ADJUSTMENT March 2005 © TOSHIBA TEC
3 - 54
3.11 Adjustment of the RADF
3.11.1 Adjustment of RADF position
It is mainly performed at the installation. It is also required when the RADF is dislocated for some rea-
son such as moving the equipment.
Remove the platen sheet during adjustment.
<Procedure>
(1) Open the RADF and remove the positioning
pin hole covers.
Fig.3-49
(2) Attach 2 positioning pins to the equipment.
Fig.3-50
Positioning pin
To Next Page
Loading...
