6
Specications of Options
81
Inner Finisher (MJ-1032)
Model name MJ-1032
Type Inner Finisher
Acceptable paper size
A3, A4, A4-R, A5-R, A6-R, B4, B5, B5-R, FOLIO, CHO-3 (120 mm x 235 mm), YOU-4 (105 mm x 235 mm), LD,
LG, LT, LT-R, ST-R, COMP, 8.5”SQ, DL (110 mm x 220 mm), COM10 (4 1/8” x 9 1/2”), Monarch (3 7/8” x 7 1/2”),
13”LG, 8K, 16K, 16K-R
Acceptable paper
weight
52 - 209 g/m
2
, 14 lb. Bond - 110 lb. Index
Number of sheets
stapled at a time
(Including 2 covers (106
- 209 g/m
2
, 29 lb. Bond -
110 lb. Index)
Paper size
64 - 80 g/m
2
,
17 - 20 lb. Bond
81 - 90 g/m
2
,
21 - 24 lb. Bond
91 - 105 g/m
2
,
25 - 28 lb. Bond
A4, A4-R, B5, B5-R, LT, LT-R, 8.5" SQ, 16K,
16K-R
50 sheets 50 sheets 30 sheets
A3, B4, FOLIO, LD, LG, COMP, 13" LG, 8K 30 sheets 25 sheets 15 sheets
Stapling position Front, Rear, Double
Power source Supplied from the equipment
Dimensions 484 mm (19.06”) (W) x 507.5 mm (19.98”) (D) x 232 mm (9.13”) (H)
Weight Approx. 15.3 kg (33.7 lb.)
Power consumption 53 W max.
Tray loading capacity of Inner Finisher (MJ-1032)
Upper Receiving Tray
(MJ-1032 with mixed paper not loaded)
Mode Non-Sort
A4, A4-R, B5, B5-R, A5-R, LT, LT-R, ST-R, 8.5”SQ,
16k, 16K-R
14 mm, 0.55”
(100)
A3, B4, FOLIO, LD, LG, COMP, 13”LG, 8K
7 mm, 0.28”
(50)
Lower Receiving Tray
(MJ-1032 with mixed paper not loaded)
Mode Non-Sort Sort Stapled
A4, A4-R, B5, B5-R, A5-R, LT, LT-R,
ST-R, 8.5”SQ, 16k, 16K-R
73 mm, 2.87”
(500)
73 mm, 2.87”
(500)
Whichever of 73 mm (2.87"), 500 sheets or
50 sets is reached rst
A3, B4, FOLIO, LD, LG, COMP, 13”LG,
8K
36 mm, 1.42”
(250)
36 mm, 1.42”
(250)
Whichever of 36 mm (1.42"), 250 sheets or
30 sets is reached rst
When mixed-size paper is loaded, the tray loading capacity should follow the specications for larger paper sizes in the above tables.
Unit: mm (with allowable error of ±4 mm or 0.158”)
Values in parentheses: Number of sheets (80 g/m
2
or 20 lb. Bond)
Unit: mm (with allowable error of ±4 mm or 0.158”)
Values in parentheses: Number of sheets (80 g/m
2
or 20 lb. Bond)