Toshiba FlashAir W-03 Series User Manual

FlashAir™ Settings:
Internet pass thru mode
● This function is available on the FlashAir W-04, FlashAir W-03 and FlashAir W-02 series with card software
version F19BAW3AW2.00.02 or later.
Internet pass thru function enables the Internet connection using other access points through
FlashAir. By connecting to an access point that is connected to Internet, you will have the access
to Internet and FlashAir at the same time.
When you are on Internet pass thru mode, you can browse and download the data stored in
the FlashAir.
You do not have to change the network settings of smartphones or other Wi-Fi
®
capable devices
when you upload images downloaded from FlashAir to SNS.

Toshiba FlashAir W-03 Series Specifications

General

Category	Storage
Type	SDHC / SDXC
SD Standard	SDHC / SDXC
Speed Class	Class 10
UHS Speed Class	UHS-I
Wireless Standard	IEEE 802.11b/g/n
Weight	Approx. 2g
Model	Toshiba FlashAir W-03
Capacity	16GB, 32GB
Wi-Fi Standard	Wi-Fi 4
Wireless Security	WEP, WPA, WPA2
Transfer Speed	Up to 90MB/s (read)
File System	FAT32 (16GB, 32GB), exFAT (64GB)
Operating Temperature	-25°C to 85°C
Storage Temperature	-40°C to 85°C
Operating Voltage	3.3V
Power Consumption (Radio On)	300 mA
Dimensions	32.0mm x 24.0mm x 2.1mm

Summary

FlashAir Settings

Internet Pass Thru Mode Overview

Enables internet connection via other access points, allowing simultaneous internet and FlashAir access.

How to Set Up Internet Pass Thru Mode via FlashAir App

Step 1: Insert FlashAir into Device

Insert the FlashAir into a compatible device (e.g., digital camera) with SDHC/SDXC memory cards.

Step 2: Turn on Device

Power on the device; wireless LAN functionality of FlashAir activates automatically.

Step 3: Connect to FlashAir on iPhone/iPad

For iPhone/iPad, select Wi-Fi connection to FlashAir before opening the App.

Step 4: Configure Internet Pass Thru Mode Settings

Enable pass thru mode, enter AP SSID and password, and click "Done".

How to Set Up Internet Pass Thru Mode via Configuration Software

Step 1: Start Configuration Software and Network Settings

Launch FlashAir configuration software (Ver.2.02+) and access "Network Settings".

Step 2: Enable Pass Thru and Enter Access Point Details

Check "Enable internet pass thru mode", enter Access Point SSID and Password.

How to Share Contents with SNS

Step 1: Select Content

Tap "Select" to enter selection mode, then tap thumbnails or icons to choose content.

Step 2: Initiate Sharing

Tap the action button to open the menu and select "Share".

Step 3: Choose Sharing Application

Select the desired application from the presented list based on selected items.

Step 4: Upload Files

Write a comment and tap "Send" to upload your files to SNS.