7. Install the replaced freezing door on the lower hinge, then install the
middle hinge and cover the hinge hole decorative cover.
8. Remove the upper left hinge cover and upper left hinge from the accessory bag.
Place the refrigerated door body on the middle hinge and install the upper left hinge.
Connect the refrigerator top signal line 4 to the door body signal line 1, and connect
the signal line 2 to the signal line 3.
Finally, replace the hinge decorative cover to the right side of the box body (note:
when replacing the hinge decorative cover to the right side of the box body, the two
inserts on the hinge decorative cover (as shown in the figure) shall be cut off ).
Decorative cover
Middle hinge
Decorative cover
Upper hinge cover
Upper hinge
Inserts
To Next Page
Loading...
