To Next PageTo Next PageHow to fix Toshiba HI-FI SQPB DVD VCR Combo remote control not working?
If your Toshiba DVD VCR Combo remote control isn't working, first, aim the remote directly at the remote sensor on the unit. Ensure you are within approximately 7 meters of the unit and that there are no obstructions blocking the path of the beam. If the issue persists, the batteries may be weak; try replacing them. Also, verify that the batteries are inserted correctly.
What to do if my Toshiba HI-FI SQPB DVD VCR Combo does not operate?
If your Toshiba DVD VCR Combo is not operating, ensure the power cord is securely plugged into the outlet. If it is, try plugging the unit into another AC outlet to rule out a faulty outlet. As a next step, try unplugging the unit, waiting a few seconds, and then plugging it back in. Finally, make sure you have selected either the DVD or VCR mode before attempting to use the unit.
Why is there no picture on my Toshiba HI-FI SQPB?
If you're getting no picture on your Toshiba DVD VCR Combo, start by checking the antenna connection to ensure it's correct and the cable is securely connected. Make sure your TV is set to video channel 3 or 4. Verify that the unit is connected correctly to the TV. Also, confirm that the video input selector on your TV is set to VIDEO (or the equivalent).
Why is there no sound from my Toshiba DVD VCR Combo?
If you're not getting any sound from your Toshiba DVD VCR Combo, first, check that the unit is connected correctly to your audio system. Ensure that the input selector on your amplifier is set properly to receive the audio from the combo unit. Also, check that the unit is not in a special playback mode.
Why Toshiba DVD VCR Combo TV recording does not work?
If your Toshiba DVD VCR Combo is not recording TV programs, and the video cassette has a broken erase prevention tab, you will need to replace the video cassette. Additionally, ensure that the unit is switched to the correct recording mode, and not set to the external input mode.
How to fix Toshiba HI-FI SQPB timer recording not working?
If your Toshiba DVD VCR Combo timer recording isn't working, the time may not be set correctly. Make sure to set the correct time. Also, the recording start and end times may not be set correctly, so verify those settings as well. Finally, ensure that the TIMER REC button is pressed and lit.
How to remove noise bars on Toshiba HI-FI SQPB screen?
If you're seeing noise bars on the screen of your Toshiba DVD VCR Combo, it might be due to tracking adjustment being beyond the range of the automatic tracking circuit; try manual tracking adjustment. Another cause could be dirty video heads, so try cleaning them. Finally, the tape itself may be worn or damaged, so consider replacing it.
How to change language on Toshiba HI-FI SQPB?
If your Toshiba DVD VCR Combo display is not shown in your language, you should select the proper language in the menu options.
What to do if Toshiba DVD VCR Combo playback doesn’t start?
If playback doesn’t start on your Toshiba DVD VCR Combo, first, ensure that a disc is inserted. If a disc is inserted, it may be dirty; clean the disc. Note that the unit cannot play DVD-ROMs, etc.
Why is my Toshiba HI-FI SQPB screen blurred?
If you're experiencing no picture, or the screen is blurred or divided into two parts on your Toshiba DVD VCR Combo, and the unit is connected to a TV via the VIDEO OUT or the S-VIDEO OUT jack, the PROGRESSIVE scan might be turned 'On'. In this case, turn off the PROGRESSIVE scan.
General| Brand | Toshiba |
|---|---|
| Model | HI-FI SQPB |
| Category | DVD VCR Combo |
| Language | English |
Covers CAUTION, WARNING, FCC NOTICE, and LASER SYSTEM warnings for safe operation.
Lists 12 essential safety instructions for operating the appliance.
Provides diagrams for connecting different types of antennas to the DVD/VCR.
Illustrates methods for connecting the DVD/VCR unit to a television.
Explains various methods for connecting the DVD/VCR to a cable TV system.
Details the basic connection procedure for linking the DVD/VCR to a TV.
Guides on connecting the unit to amplifiers for enhanced audio playback.
Step-by-step guide for recording a TV program, including channel selection.
Instructions for setting up timed recordings using the OTR feature.
Details on programming daily/weekly timers and managing multiple recordings.
Step-by-step guide to loading and playing DVD discs, including basic controls.
Instructions for zooming in on video frames and locating specific scenes.
Guides on marking desired scenes for later playback and returning to them.
Explains how to set up repeat playback for titles, chapters, tracks, or specific segments.
Methods for arranging playback order or playing tracks randomly.
