To Next PageTo Next PageWhy Toshiba SD-V393 remote control does not function?
If the remote control for your Toshiba DVD VCR Combo isn't working, ensure you're aiming it directly at the remote sensor from within approximately 7 meters, and that there are no obstructions in the path of the beam. Weak batteries can also cause this issue, so try replacing them, making sure they are correctly inserted. Reducing the amount of light in the room can also help.
What to do if Toshiba DVD VCR Combo has no picture?
If your Toshiba DVD VCR Combo shows no picture, check that the antenna connection is secure and the antenna cable is properly connected. Ensure your TV is set to the correct video channel, and that the unit is connected correctly. Also, verify that the video input selector on your TV is set to VIDEO (or the appropriate equivalent) and that the channel is set to the correct mode.
What to do if Toshiba DVD VCR Combo does not operate?
If your Toshiba DVD VCR Combo isn't operating, first ensure that the power cord is properly plugged in and try using a different AC outlet. If that doesn't work, unplug the unit, wait a few seconds, and then plug it back in. Also, make sure you've selected either the DVD or VCR mode before attempting to use the device.
What to do if my Toshiba DVD VCR Combo has no sound?
If there is no sound from your Toshiba DVD VCR Combo, first check that the unit is connected correctly. Also, verify that the input selector on your amplifier is set properly. If the unit is in a Special playback mode, exit that mode.
Why does Toshiba DVD VCR Combo TV recording not work?
If TV recording is not working on your Toshiba DVD VCR Combo, check the erase prevention tab on the video cassette. If the tab is broken off, you won't be able to record. Also, ensure that the unit is not in the external input mode; switch it from external input mode if it is.
Why does Toshiba SD-V393 DVD VCR Combo timer recording not work?
If timer recording is not working on your Toshiba DVD VCR Combo, make sure the time is set correctly. Also, verify that the recording start and end times are set correctly. Finally, ensure that the TIMER REC button has been pressed and is lit.
Why does Toshiba DVD VCR Combo have noise bars on screen?
If you're seeing noise bars on the screen of your Toshiba DVD VCR Combo, try manual tracking adjustment, as the automatic tracking circuit may be out of range. Also, the video heads may be dirty, so try cleaning them. If the tape is worn or damaged, use a new tape.
How to fix no Cable TV reception on Toshiba DVD VCR Combo?
If you're not getting Cable TV reception on your Toshiba DVD VCR Combo, first check all Cable TV connections to ensure they are secure. If the connections are good, the problem may be with the station or Cable TV system itself. Try tuning to another station to see if the issue persists.
What to do if Toshiba DVD VCR Combo Playback doesn’t start?
If playback doesn't start on your Toshiba DVD VCR Combo, first ensure that a disc is inserted. If a disc is already inserted, it may be dirty, so clean it. Also, confirm that the disc is compatible with the unit, as it cannot play DVD-ROMs, etc.
How to change display language on Toshiba SD-V393?
To change the display language on your Toshiba DVD VCR Combo, select the proper language in the menu options.
General| Type | DVD VCR Combo |
|---|---|
| Brand | Toshiba |
| Model | SD-V393 |
| Video Format | NTSC |
| DVD Playback | Yes |
| VCR Playback | Yes |
| Recording Format | VHS |
| Audio Output | Stereo |
| DVD Type | DVD player |
| VHS Playback | Yes |
| Remote Control | Yes |
| DVD Playback Formats | DVD-Video, DVD-R, DVD-RW |
| Connections | Composite Video, S-Video |
| Connectors | Composite Video, S-Video |
Identifies the location of the unit's rating sheet and safety caution markings.
Details precautions related to power, lightning, grounding, outdoor antennas, and liquids.
Instructions for connecting antennas and setting up the DVD/VCR to a TV.
Guides on setting the video channel, tuner, and scanning channels for VCR operation.
Instructions for loading, unloading, playing, stopping, and rewinding VHS tapes.
Guides on how to record a TV program using the VCR.
Covers One-touch Timer Recording (OTR) and manual timer recording.
Guides on loading, playing, stopping, pausing, and removing DVD discs.
Details on searching, frame-by-frame, slow-motion, and speed adjustments.
Explains how to zoom into images and locate desired scenes on a disc.
Provides solutions for common problems encountered with the DVD/VCR.
