What to do if my Toshiba IC-S19RH is not heating up?
If the "ON/OFF" indicator is lit and the display is working normally but your Toshiba cooker isn't heating, check the following: * Ensure the pot material is appropriate. * Verify the appliance is not in a "Preset" working status.
Why does my Toshiba Cooker suddenly stop heating?
Your Toshiba cooker might stop heating suddenly due to several reasons: * The oil temperature may be too high when frying. * The surrounding temperature is very high. * The air inlet or outlet is blocked. * The default heating time is over. * The self-safety protection has been activated. In any of these cases, wait for a few minutes before reconnecting the power.
What to do if my Toshiba IC-S19RH shows error code E7 E8?
If your Toshiba hotplate shows error codes E7 or E8, turn it off. When the voltage returns to normal, turn the hotplate back on; it should then operate as usual.
What to do if my Toshiba IC-S19RH Cookers shows error code E3 E6 EA?
If your Toshiba induction hotplate displays error codes E3, E6, or EA, wait a moment. When the temperature of the hotplate returns to normal, press the "ON/OFF" button. The induction hotplate should then operate as usual.
How to troubleshoot a Toshiba IC-S19RH Cookers that won't turn on?
If the indicator and display of your Toshiba cooker do not light up after plugging in the power cord and pressing the "ON/OFF" key, check if the power plug is properly connected. Also, check whether the switch, power outlet, fuse, or power cord is damaged.
To Next Page
General