User’s Manual D-1
AC Power Cord and Connectors
Appendix D
AC Power Cord and Connectors
The AC input plug of power cord must be compatible with various interna-
tional AC power outlets. Power cords need to meet the local standards and
the specifications listed as below:
Certification agencies
In Europe, two conductors power cords must be VDE type, H05VVH2-F or
H03VVH2-F; while three conductorsbe VDE type, H05VV-F.
For the United States and Canada, two pin plug configuration must be
2-15P (250V) or 1-15P (125V); while three pin be 6-15P (250V) or 5-15P
(125V) as designated in the U.S. National Electrical code handbook and
the Canadian Electrical Code Part II.
Length: Minimum 1.7 meters
Wire size: Minimum 0.75 mm
2
Current rating: Minimum 2.5 amperes
Voltage rating: 125 or 250 VAC
(depending on country/region’s power standards)
Europe:
Austria: OVE Italy: IMQ
Belgium: CEBEC The Netherlands: KEMA
Denmark: DEMKO Norway: NEMKO
Finland: FIMKO Sweden: SEMKO
France: LCIE Switzerland: SEV
Germany: VDE United Kingdom: BSI
Outside of Europe:
U.S. and Canada: UL listed and CSA certified
No. 18 AWG, Type SVT or SPT-2
China: CCC, CQC India: STQC
Australia: AS
To Next Page
Loading...
