User’s Manual 7-5
BIOS Setup and Passwords
LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shutdown when it
receives a wake-up packet (Magic packet) from the LAN. The Wake-up on
LAN from Suspend Mode or Hibernation Mode function is dependent on the
setting of OS. (The setting in BIOS Setup does not affect the setting of OS.)
Enabled (Mode1) Enables USB Sleep and Charge function.
Enabled (Mode2) Enables USB Sleep and Charge function.
Enabled (Mode3) Enables USB Sleep and Charge function.
Enabled (Mode4) Enables USB Sleep and Charge function.
Disabled Disables USB Sleep and Charge function
(Default).
Enabled Enables Wake-up on LAN from shutdown.
Disabled Disables Wake-up on LAN from shutdown.
(Default)
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Wake-up on LAN does not work without the AC adaptor. Leave it
connected, if you are using this feature.
To Next Page
Loading...
