What to do if my system doesn't recognize the full capacity of my Toshiba MK4025GAS Storage?
Some systems may not recognize the full capacity of newer, larger hard drives. To overcome this, you can use third-party software that breaks the 'capacity barrier.' Consider using EZ Drive by Micro House or Disk Manager DiskGo by Ontrack. Check with your local computer/software supplier or contact the software manufacturer for availability.
General| Capacity | 40 GB |
|---|---|
| Rotation Speed | 4200 RPM |
| Cache | 2 MB |
| Spindle Speed | 4200 RPM |
| Buffer Size | 2 MB |
| Average Seek Time | 12 ms |
| Average Latency | 7.14 ms |
| Power Consumption (Read/Write) | 2.5 W |
| Power Consumption (Idle) | 0.7 W |
| Weight | 95 g |
| Interface | ATA/IDE |
| Form Factor | 2.5 inches |
| Operating Shock | 300 G (2 ms) |
Details the key features of the MK4025GAS 2.5-inch hard disk drive, including capacity and interface.
Explains how to configure the drive as a Master or Slave unit using jumpers and pin settings.
Provides guidelines for mounting, handling, and connecting the drive within a computer system.
Emphasizes the importance of regular data backup to prevent potential data loss.
Addresses issues with systems not recognizing full HDD capacity and suggests software solutions.
Provides guidance on installing the 2.5-inch Toshiba Hard Drive into desktop or tower systems.
Details model, interface, capacity, speed, voltage, power consumption, and shock specs.
Lists internal drive parameters like disks, heads, tracks, cylinders, sectors, and blocks.
Outlines physical size, weight, and the regulatory standards the drive complies with.
Describes the drive-side and host-side connectors for the HDD interface.
Specifies electrical characteristics for interface cables, including impedance and capacitance.
To Next Page
