Need help?Do you have a question about the Toshiba MK6025GAS and is the answer not in the manual?
General| Type | HDD |
|---|---|
| HDD size | 2.5 \ |
| HDD speed | 4200 RPM |
| Interface | Parallel ATA |
| HDD capacity | 60 GB |
| Average seek time | 12 ms |
| HDD number of heads | 4 |
| Track to track seek time | 2 ms |
| Storage drive buffer size | 8 MB |
| Mean time between failures (MTBF) | 300000 h |
| Operating shock | 200 G |
| Operating altitude | -300 - 3000 m |
| Non-operating shock | 800 G |
| Storage temperature (T-T) | -20 - 65 °C |
| Operating temperature (T-T) | 5 - 55 °C |
| Windows operating systems supported | Yes |
| Operating voltage | 5 V |
| Power consumption (read) | 2.3 W |
| Power consumption (standby) | 0.25 W |
| Power consumption (PowerSave) | 0.1 W |
Weight and Dimensions| Depth | 100 mm |
|---|---|
| Width | 69.85 mm |
| Height | 9.5 mm |
| Weight | 98 g |
Lists key specifications and capabilities of the hard disk drive.
Explains how to configure the drive as Master or Slave using jumpers.
Provides guidelines for mounting, connecting, and physically installing the drive.
Advises on the importance of regularly backing up data to prevent loss.
Addresses common problems like capacity recognition and installation queries.
Details model, interface, capacity, speed, buffer, and drive characteristics.
Covers error rates, voltage, power consumption, dimensions, and weight.
Lists various safety and compliance standards the drive meets.
Identifies drive/host connectors and outlines recommended interface cable specifications.
Details the pinout and signal assignments for the drive's interface connector.
To Next Page
