OPERATION INSTRUCTIONS
NOTE
• This function only works for one completed cooking. If pause or open
the oven door during cooking, the current cooking cannot enter the
turntable reset function.
• Under the reset state, opening the door or " STOP/CANCEL " button is
pressed, the oven will go back to waiting state.
19. COOKING END REMINDING FUNCTION
When the cooking is over, the buzzer will sound 5 “beep” to alert user the cooking is
finished.
a. In waiting state, the oven will display clock and ":" will flash.
b. In function setting state, the oven will display the related setting.
c. In the operation and suspending state, the oven will display the residual cooking
time.
d. Once the cooking programme has been set, "START/+30Sec." is not pressed in 5
minutes. The current time will be displayed. The setting will be cancelled.
20. DISPLAY SPECIFICATION
a. When cooking finished, if the turntable is not at the initial position, it will enter
the turntable reset function.
At this time, the lamp, fan and turntable are working, " " will dynamic display.
After the turntable has reset, the oven stops cooking and reminds cooking finished.
b. In waitng state, press number key "5" for 3 seconds, there will be a long "beep"
denoting turntable reset function is turnned off. To turn on the turn table reset
function, in waiting state press number key "5" for 3 seconds, there will be a long
"beep" denoting that turntable reset function is released.
18. TURNTABLE RESET FUNCTION
NOTE
When the oven is electrified with the door is close, the oven will enter the
children-lock state automatically.
•
INSTRUCTION FOR USE
To Next Page
Loading...
Need help?
General
