EN-15
OPERATION INSTRUCTIONS
Press Cook Time , "00:00" will display, then press number pads.
Press Power Level and "PL10" will display. Then press number pads to select a different
power level.
In cooking state of microwave, press "Power Level", the current power will be displayed
Example : To cook the food with 50% microwave power for 15 minutes.
a. Press Cook Time , "00:00" will display.
b. Press "1, 5, 0, 0" in order for 15:00 to appear in the display.
c. Press Power Level , then press "5" to select 50% microwave power.
d. Press to start cooking. Buzzer sounds once. The remaining cooking time will
display.
1. POWER LEVELS
Ten power levels are available.
a. Press Clock once, "00:00" will appear in the display.
b. Press the number pads to enter the current clock time. For example, if the time is
now 10:12, press " 1, 0, 1, 2 " in order.
c. Press Clock to finish clock setting, " : " will flash and the numbers will appear
as a clock time in the display.
2. CLOCK SETTING
When the microwave oven is plugged into an outlet, "0:00" will display.
Power 100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
Level 10 9 8 7 6 5 4 3 2 1
PL10Display PL9 PL8 PL7 PL6 PL5 PL4 PL3 PL2 PL1
NOTE
• If the numbers entered are not within the range between 1:00 to 12:59,
the setting will not be accepted until valid numbers are entered.
• In the process of setting clock, if the pad is pressed or if there is
no operation within 1 minute, the display will automatically return to
the previous clock setting.
for 3 seconds.
To Next Page
Loading...
