When the cooking is over, the screen will display "End" to reminds user the cooking is
nished. In order to make the appliance into the normal operating state, please press
16. COOKING END REMINDING FUNCTION
17. OTHER SPECIFICATIONS
18. TURNTABLE RESET FUNCTION
1) " START/30SEC. " must be pressed to continue cooking if the door is opened during
cooking;
2) The buzzer sounds once by ecient press, inecient press will be no responce.
" STOP / CANCEL " or open the door .
When cooking nished, if the turntable is not at the initial position, it will enter
the turntable reset function. At this time, the lamp, fan and turntable are
working, " " will dynamic display. After the turnt able has reset, the
oven stops cooking and reminds cooking is nished.
(1) This function only works for one completed cooking. If pause or open the
oven door during cooking, the current cooking cannot enter the
turntable reset function.
Note: 1) Under the reset state, opening the door or “
STOP/Cancel
” button is
pressed, the oven will go back to waiting state.
2) The function will be reserved after power loss
"beep" and the turntable reset function is turnned o. To turn on the turn-
table reset function, in waiting state press number key "5" for 3 seconds,
there will be a long "beep" denoting that turntable reset function is released.
(2) In waitting state, press number key "5" for 3 seconds, there will be a long
.
19. SCREEN-OUT FUNCTION
(1) In standby, click the key(less than 3 seconds, and lift the but-
ton
to
respond, because has already attached 3 seconds long
pr
es
sing
the
child
lock event, so you must click and lift to respond) into the black
screen save
electricity mode.
(2) Under the child lock, click the key(less than 3 seconds, and lift).
(3) Other modes other than the above can not enter the power saving mode,
and can not enter the black screen power saving mode under the opening state.
OPERATION
“
STOP/Cancel
”
“
STOP/Cancel
”
“
STOP/Cancel
”