To Next PageTo Next Page
Need help?Do you have a question about the Toshiba MMD-AP0071BH and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | MMD-AP0071BH |
| Category | Air Conditioner |
| Language | English |
Lists various indoor unit types and their parts, including cassette and duct types.
Lists outdoor unit models and their associated components.
Lists Flow Selector unit models and their components.
Warnings and cautions for installation, operation, and maintenance procedures.
Additional safety measures for installation, including grounding and drainage.
Details of parts for various indoor unit types like cassette and duct models.
Details of outdoor unit components and their functions.
Identifies all parts and functions of the remote controller.
Steps for preparation, system requirements, and basic operation.
How to set and control the air outlet direction and swing.
Specific procedures for adjusting airflow direction on different unit types.
Instructions for setting and cancelling timer functions (OFF, Repeat OFF, ON).
Guidelines for choosing a suitable installation site and required space.
Safety and requirements for electrical wiring installation.
Instructions for cleaning air filters, grilles, and main units.
Pre-operation checks, capacities, and operational behaviors of the unit.
Restrictions and considerations for moving and reinstalling the air conditioner.
Identification of common symptoms and their potential causes.
Actions to take for serious problems before contacting service.
How to check and interpret past error codes from the remote controller.
List of included accessory parts and parts to be procured locally.
Explains safety symbols and provides general warnings.
Critical warnings related to the installation process.
Essential tools and precautions for installing the new R410A refrigerant system.
Criteria for selecting an appropriate installation location.
Guidelines for necessary clearances and space around the unit.
Procedures for safe loading, unloading, and transportation of outdoor units.
Requirements for the unit's base and protection against snowfall.
Instructions for arranging units and using anchor bolts.
Steps for connecting refrigerant pipes, including brazing.
Guidelines for choosing appropriate pipe materials and dimensions.
Procedures for ensuring system integrity and removing air.
Calculation and process for adding refrigerant to the system.
How to operate unit valves and apply heat insulation to pipes.
Specifications for power supply and wiring connections.
Principles for designing and making electrical connections for units.
Visual representation of the system's electrical connections.
Procedure for automatically setting indoor unit addresses.
How to set unit addresses manually using the remote controller.
Steps to clear and reset unit addresses to factory defaults.
Cautions and examples for connecting multiple indoor units to an FS unit.
Steps to set the item code for multi-unit systems.
Procedure to set a specific indoor unit to cooling-only mode.
Instructions for running test operations via remote controller.
Performing test operations via the outdoor unit's interface board.
Understanding error codes displayed on the outdoor unit's 7-segment display.
Detailed list of outdoor unit error codes and their meanings.
List of included accessory parts and parts to be procured locally.
Safety guidelines regarding refrigerant concentration in installation rooms.
