To Next PageTo Next Page
Need help?Do you have a question about the Toshiba MMK-AP0123H and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | MMK-AP0123H |
| Category | Air Conditioner |
| Language | English |
Introduction to installing the indoor unit for the SMMS High-Wall system.
Lists various model names for the indoor units and system types.
Details on the characteristics and implications of using R410A refrigerant.
Lists all parts provided with the indoor unit for installation.
Details on other manuals like the Owner's Manual.
Covers critical safety guidelines to follow during installation.
Highlights crucial safety measures related to electrical connections and grounding.
Specific cautions for working with R410A refrigerant during installation.
Instructions for safely disconnecting the power supply before work.
Defines the requirements for a suitable installation location.
Lists locations that should not be used for installation.
Specifies the necessary clearance around the indoor unit.
Further details on selecting an appropriate installation place.
Critical safety warnings for mounting the indoor unit.
General guidelines and requirements for indoor unit installation.
Guidance on selecting placement for effective air circulation.
Instructions for drilling a hole for refrigerant pipes.
Steps for securing the installation plate directly to the wall.
Ensuring the installation plate is firmly fixed to the wall.
Steps for preparing and forming the piping and drain hose.
Details on cutting the front panel and changing the drain hose.
Instructions for removing and fixing the drain cap.
Steps for removing and securely installing the drain hose.
Specific instructions for connecting pipes on the left side.
Guidance on bending pipes and applying insulation for connections.
Final steps to firmly attach the indoor unit to the installation plate.
Instructions for setting up the drain pipe for correct drainage.
Specifies copper pipe requirements and sizes for refrigerant lines.
Details on permissible lengths and height differences for refrigerant piping.
Instructions on flaring pipes and recommended tools for R410A.
Specifies the correct tightening torque for flare pipe connections.
Guidance on applying heat insulation to refrigerant pipes.
Procedures for testing system airtightness and checking for gas leaks.
Critical safety warnings for electrical wiring procedures.
Guidelines for proper grounding and circuit protection devices.
Details on power supply requirements and wire specifications.
Specifications for control and communication lines.
Information on wiring for the wired remote controller.
Illustrates wiring connections between units.
Instructions for setting up unit addresses.
Visual representation of wired remote controller connections.
Step-by-step guide for connecting power and control wiring.
Instructions for wiring the flow selector unit to the indoor unit.
Notes on the necessity of a wired remote controller for certain functions.
Procedures for modifying various control settings.
How to adjust the filter cleaning notification light.
Adjustments to enhance heating efficiency.
Methods for manually adjusting the horizontal and vertical louvers.
Steps for setting up group control for multiple units.
Essential checks before performing a test run.
Detailed procedure for conducting a test run using the wired remote.
Procedure for performing a forced test run using a wireless remote.
Checking the transmission and operation of the remote controller.
How to view error codes and indoor unit numbers on the display.
Procedure to access and review past error logs.
Overview of how to use the self-diagnosis function.
List of error codes for indoor units and wireless remotes.
List of error codes related to outdoor units and IPDU.
Error codes specific to the TCC-LINK communication.
