What to do if start/stop operation on remote controller is unavailable for Toshiba Air Conditioner?
If the start/stop operation on the remote controller isn't working, check if the auxiliary unit or remote control is being operated.
What to do if my Toshiba MMU-AP0094HP1-E Air Conditioner has no communication from remote controller and network adapter?
Check the check display of the corresponding follower unit.
What to do if my Toshiba MMU-AP0094HP1-E Air Conditioner has no communication from outdoor unit?
Check position Trouble on the interface P.C. board or part in which of the header unit.
Why does the compressor of my Toshiba MMU-AP0094HP1-E Air Conditioner not operate?
If the compressor isn't operating, ensure that the unit has not been delayed for 3 minutes after the compressor was last turned off.
Why does the outdoor fan of my Toshiba Air Conditioner not rotate, or why does the fan speed change?
If the outdoor fan isn't rotating or its speed changes, it might be because low cooling operation is being controlled.
What does it mean if the float switch operated in my Toshiba Air Conditioner?
If the float switch has been activated, it indicates that indoor overflow was detected.
What does it mean if my Toshiba MMU-AP0094HP1-E system abnormally stopped by input of external error (CN80)?
The system stopped because an external error was input in the indoor unit (Interlock).
What does it mean if communication error occurs between MCU of main motor microprocessors of Toshiba MMU-AP0094HP1-E?
Regular communication between header and follower units in the indoor unit was impossible.
What does it mean if error of indoor AC can was detected on my Toshiba Air Conditioner?
This indicates an Indoor EEPROM error (Other error may be detected).
General| Category | Air Conditioner |
|---|---|
| Cooling Capacity (kW) | 2.5 |
| Heating Capacity (kW) | 3.2 |
| Power Source | 220-240V, 50Hz |
| Indoor Unit Weight | 9 kg |
To Next Page