To Next PageTo Next PageWhat to do if the Toshiba MMU-AP0181MH Air Conditioner remote controller displays a check code and indoor unit number?
When a fault occurs, the remote controller displays a check code and indoor unit number. To address this, operate the air conditioner according to the instructions for 'Confirmation of error history'.
How to check error history on a Toshiba MMU-AP0181MH?
To confirm the error history on your Toshiba Air Conditioner after a fault, simultaneously push the SET and TEST buttons for at least 4 seconds. The display will then show the CODE No., UNIT No., and Check Code.
What happens if I push the CL button on my Toshiba MMU-AP0181MH remote?
Pushing the CL button will erase all of the error history for that indoor unit. To keep the error history, avoid pressing the CL button.
How to confirm error history on Toshiba MMU-AP0181MH?
To view the error history on your Toshiba Air Conditioner, simultaneously push the SET and TEST buttons for at least 4 seconds.
Why should I avoid pushing the CL button on my Toshiba MMU-AP0181MH Air Conditioner?
Avoid pressing the CL button on your Toshiba Air Conditioner because doing so will erase the entire error history for that indoor unit.
General| Category | Air Conditioner |
|---|---|
| Cooling Capacity | 5.0 kW |
| Heating Capacity | 5.6 kW |
| Power Source | 220-240V, 50Hz |
| Power Consumption (Heating) | 1.55 kW |
| Coefficient of Performance (Heating) | 3.61 |
| Refrigerant | R410A |
| Outdoor Unit Net Weight | 35 kg |
| Air Flow (Indoor Unit) | 10 m³/min |
