– 7 –
3-2. Wired remote controller (RBC-AMSU51- )
Refer to Owner’s Manual of RBC-AMSU51- for the detailed operation method.
1
2
3
7
8
4,5
6
Room A
12:00
Mode
Fan Speed
35
Heat
Temperature sensor
The button LED lights while the Hot water
module is running.
Model name label
1 [ MONITOR] button
Displays the monitoring screen.
2 [ MENU] button
Displays the menu screen.
For menu items, refer to following table.
3 [ CANCEL] button
Functions as indicated on the screen, such as
returning to the previous menu screen.
4 [ ∧ ] button
During normal operation: adjusts the temperature.
On the menu screen: selects a menu item.
5 [ ∨ ] button
During normal operation: adjusts the temperature.
On the menu screen: selects a menu item.
6 [ F1] button
Varies its function according to the setting screen.
7 [ F2] button
Varies its function according to the setting screen.
8 [ ON/OFF] button
Menu items Available function No function
1 Wind Direction
✓
2 Individual louver
✓
3 Louver setting
✓
4 Off reminder timer
✓
5 Schedule timer
✓
6 Night operation ✓
7Filter sign
✓
8 Auto grille
✓
9 Energy saving
✓
10 Initial setting
✓
11 Ventilation
✓
12 Soft cooling setting
✓
13 Occupancy sensor
✓
14 Power consumption
✓
15 Information
✓
Switching between the normal display and detailed display
Push and hold the [ CANCEL] button and [ MONITOR] button at the same time for more than 4 seconds
to switch the display mode.
The normal display mode is selected as a factory default setting.
Normal display mode (factory default)
Detailed display mode
▼ Icon list
Shows the central control device prohibits the
use of the remote controller
Shows a timer function is activated.
Shows operation switching control is in
progress.
35
Room A
12:00
Mode
Fan Speed
Heat
Icons appear on the screen when the detailed display mode is selected.
13-EN 14-EN
To Next Page
Loading...
