What to do if my Toshiba MMY-MAP1004FT8-E Air Conditioner shows error E16?
If your Toshiba Air Conditioner displays error code E16, it indicates a capacity overload or an issue with the number of connected indoor units. Check if the capacity is exceeded (error code 00) or if the number of connected units is the problem (error code 01 and up).
Why does my Toshiba MMY-MAP1004FT8-E Air Conditioner show error E26?
If your Toshiba Air Conditioner displays error code E26, it indicates a decrease in the number of connected outdoor units. Verify the number of outdoor units which were normally received and the detected outdoor unit number.
What causes error E06 on a Toshiba MMY-MAP1004FT8-E Air Conditioner?
If your Toshiba Air Conditioner displays error code E06, it means there's a decrease in the number of indoor units. Verify the number of indoor units which were normally received.
What does error E19 mean on my Toshiba MMY-MAP1004FT8-E?
If your Toshiba Air Conditioner displays error code E19, it indicates an error with the number of header outdoor units. Specifically, error code 00 means there is no header, while code 02 indicates 2 or more header units are present.
How to troubleshoot automatic addressing start error on a Toshiba MMY-MAP1004FT8-E?
If your Toshiba Air Conditioner displays error code E12, it indicates an automatic addressing start error. Solution: Check the communication between indoor and outdoor units (01) and the communication between outdoor units (02).
What does it mean when my Toshiba MMY-MAP1004FT8-E Air Conditioner displays error E20?
If your Toshiba Air Conditioner displays error code E20, it means other lines are connected during automatic addressing. Specifically, error code 01 indicates another outdoor line is connected, while code 02 indicates another indoor line is connected.
What does error code E31 mean for Toshiba MMY-MAP1004FT8-E Air Conditioner?
If your Toshiba Air Conditioner displays error code E31, it indicates a communication error between the MCU and sub MCU. This may involve IPDU quantity information, with 80 specifically indicating an IPDU communication error.
Covers general safety, daily operation, and important warnings for user protection.
Outlines safe procedures for moving and storing the air conditioner unit.
Details essential safety measures for installing and operating the appliance.
Provides safety guidance for maintenance, repairs, and relocating the air conditioner.
Explains various symbols and indications found on the product carton for proper handling.
Provides guidelines on how to stack and handle cartons to prevent damage or injury.
Identifies and describes the parts of the outdoor unit.
Details parts for 4-way and compact 4-way cassette indoor units.
Explains parts for 2-way, 1-way cassette, and concealed duct indoor units.
Details parts for slim duct, ceiling, floor standing, and cabinet indoor units.
Explains the various indicators and symbols shown on the remote controller's LCD display.
Details the functions of each button in the operation section of the remote controller.
Explains the specific functions of buttons like Fan speed, Timer, Mode, and Power save.
Steps to take before starting the air conditioner for the first time or after a long period.
How to adjust the fan speed during operation.
How to adjust the desired temperature setting.
How to activate and deactivate the power saving mode for energy efficiency.
Explains the different timer types available: Off timer, Repeat-Off timer, and On timer.
Guides on setting and cancelling timer operations.
Guidance on choosing suitable locations for installing the air conditioner unit.
Advice on minimizing noise and vibration from the unit's operation.
Essential checks to perform before starting the air conditioner operation.
Explains how heating performance is affected by outside air temperature.
Details on defrost function, 3-minute delay, power failure, and high pressure switch protection.
Instructions on how to adjust the louver direction for different operating modes.
How to stop the automatic louver swing and fix it at a desired position.
How to control louvers individually for specific indoor units.
How to configure different automatic swing patterns for louvers.
How to lock louvers in position and how to release the lock.
How to adjust the horizontal air discharge direction for specific unit types.
How to adjust vertical louver direction for specific unit types like 1-way cassette and ceiling.
Importance of cleaning air filters to maintain cooling/heating performance and save energy.
Recommendations for comfortable operation, energy efficiency, and room ventilation.
Warning about high-place work and the need for qualified service personnel for maintenance.
Instructions on cleaning air filters and resetting the filter indicator.
Recommended operating temperatures for cooling and heating modes for proper performance.
Procedures for cleaning air filters of floor standing cabinet and floor standing indoor units.
Steps for preparing the unit for non-use and recommendation for periodic inspections.
Lists common symptoms and their likely causes to help diagnose issues before servicing.
How to check error codes, confirmation procedures, and critical warnings for immediate action.
Provides sound power levels (dBA) and weight (kg) for different models.
Official declaration regarding compliance with relevant directives and harmonized standards.
General| Brand | Toshiba |
|---|---|
| Model | MMY-MAP1004FT8-E |
| Category | Air Conditioner |
| Language | English |
To Next Page
