Need help?Do you have a question about the Toshiba MV13L2 and is the answer not in the manual?
Places needing special attention are indicated by labels or seals.
Caution against high voltage parts to prevent electric shock.
Use parts with specific safety characters like incombustibility.
Exercise caution when removing or servicing the CRT.
Use designated parts and avoid circuit modification to prevent X-ray emission.
Verify parts, wiring, and insulation for safety after repair.
Steps to remove major mechanical and electronic components.
Procedures for disassembling various parts of the VCR deck mechanism.
Detailed steps for safely removing the CRT anode cap.
Guide to accessing and using various service modes for adjustment.
Recommended service intervals and confirmation of device usage hours.
Steps for replacing the memory IC and configuring initial data settings.
List and description of specialized tools needed for servicing.
Initial steps and precautions before performing service.
Steps to adjust the reel disk height for proper tape loading.
Procedure for adjusting the tension post position.
How to confirm playback and back tension torque.
To Next Page
General
