EasyManuals Logo

Toshiba Portege A600-S2201 User Manual

Toshiba Portege A600-S2201
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #143 background imageLoading...
Page #143 background image
User’s Manual 6-6
Power and Power-Up Modes
In such cases you should follow the steps as detailed below:
1. Fully discharge the battery by leaving it in the computer with the power
on until the system automatically turns itself off.
2. Connect the AC adaptor to the DC IN 15V jack of the computer, and to
a wall outlet that is supplying power.
3. Charge the battery until the Battery indicator glows white or green.
Repeat these steps two or three times until the battery recovers normal
capacity.
Monitoring battery capacity
Remaining battery power can be monitored using the following methods.
Clicking the battery icon on the Taskbar
Via the Battery Status in the Windows Mobility Center window
Technology which increases battery operating time
This computer is equipped with technology which increases battery
operating time.
The following functions allow for increased battery operating time.
1. Semi-transparent LCD (PORTÉGÉ R600 only)
BackLight On/Off button
Please refer to the Special features section in Chapter 3,
Hardware, Utilities and Options.
2. ODD
Optical disc drive power on/off functionPlease refer to the Hot
keys section in Chapter 5, The Keyboard.
You should wait at least 16 seconds after turning on the computer
before trying to monitor the remaining operating time. This is because
the computer needs this time to check the battery's remaining capacity
and then calculate the remaining operating time, based on this
together with the current power consumption.
Please be aware that the actual remaining operating time may differ
slightly from the calculated time.
With repeated discharges and recharges, the battery's capacity will
gradually decrease. In view of this it will be noted that an often used,
older battery will not operate for as long as a new battery even when
both are fully charged.
To start BIOS Setup;
1. Turn on the computer while pressing the ESC key.
2. Press the F1 key when directed.
To end the BIOS Setup;
1. Press End and then press the Y key to accept the changes. The
computer will restart.

Table of Contents

Other manuals for Toshiba Portege A600-S2201

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba Portege A600-S2201 and is the answer not in the manual?

Toshiba Portege A600-S2201 Specifications

General IconGeneral
BrandToshiba
ModelPortege A600-S2201
CategoryLaptop
LanguageEnglish

Related product manuals