193
If Something Goes Wrong
DVD operating problems
Jumping video lines appear around the DVD-ROM video
window.
To change the screen’s display resolution:
1 Click Start, Control Panel.
The Control Panel window appears.
2 Click Appearance and Themes, and double-click the Display
icon.
The Display Properties dialog box appears.
3 Click the Settings tab.
4 Next to the words Desktop Area, move the slider to a lower
setting, such as 800 x 600 or 640 x 480.
5 Click OK.
DVD titles, games, or applications appear distorted.
Having Stretch enabled when your video resolution is set to
640 x 480 or 800 x 600 can cause distortion. To disable Stretch,
follow the instructions below:
1 Right-click the Desktop, select Properties.
2 Select the Settings tab.
3 Select the Advanced Flat Panel tab.
4 Click Disable Display Stretch Feature.
5 Click OK.
The screen saver runs while you are watching a movie or title.
If the screen saver is enabled, it runs on top of any movie or title
you are watching. To disable the screen saver:
1 Click Start, Control Panel.
The Control Panel window appears.
2 Click Appearance and Themes, and double-click the Display
icon.
The Display Properties dialog box appears.
3 Click the Screen Saver tab.
In the Screen Saver list, the current screen saver is highlighted.
4 Click the down arrow at the right of the current screen saver
name.
A list of screen savers displays.
To Next Page
Loading...
