Key Combination Function
FN + F8 Switches the active wireless devices.
FN + F9 Enables or disables the Touch Pad.
FN + F10 Turns on Arrow Mode.
FN + F11 Turns on Numeric Mode.
FN + F12 Locks the cursor on a specific line.
FN + ESC Turns the sound on or off.
FN + 1 Reduces the icon size on the desktop or the font
sizes within one of the supported application
windows.
FN + 2 Enlarges the icon size on the desktop or the font
sizes within one of the supported application
windows.
FN + 3 Decreases the volume of the computer.
FN + 4 Increases the volume of the computer.
FN + Space Changes the display resolution.
FN + E ( ) Cuts off all data communications with the keyboard
dock.
FN + Z ( )
Toggles the mode of the keyboard backlight
between Timer, On, and Off.
To set up the brightness, click Start -> All
Programs -> TOSHIBA -> Tools & Utilities ->
HWSetup. Click Keyboard tab, and select a level
under Keyboard Backlight Brightness Control.
To set up the timer, launch the BIOS setup utility,
select Power Management -> Keyboard
Backlight Control Mode, and select TIMER.
Adjust the timer under Backlight Lighting Time.
Flash Cards
Flash Cards makes it visual and easy to access and use the function keys.
Normally the cards are hidden from view. To activate and use the Flash
Cards, do the following:
1. Press and hold the FN key.
Flash Cards appears on top of the screen by default.
2. Press the function key or click the card associated with the desired
function.
The selected card with available options appears.
User's Manual
4-12
To Next Page
Loading...
