Toshiba Qosmio F750 Series User Manual

The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this
feature.
Regarding Wake-up on LAN from sleep or hibernation, you must
check the "Allow the device to wake the computer" check box within
the LAN Device properties. (This feature does not effect the Wake-up
on LAN from sleep or hibernation.)
Power will be automatically turned on when a signal is received from an
administrator's computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The
battery retention time will be shorter than the times listed in this manual
when this function is enabled. Refer to User Information Guide about
Retaining time.
Enabled Enables Wake-up on LAN from shutdown.
Disabled Disables Wake-up on LAN from shutdown.
(Default)
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled Enables Built-in LAN functions. (Default)
Disabled Disables Built-in LAN functions.
Button Setting
Function Button
This feature allows you to set conditions of the front operation panel.
Enabled Enables the front operation panel. (Default)
Disabled Disables the front operation panel.
Function Button Beep
Use this option to enable or disable sound of the front operation panel.
Enabled Enables sound of the front operation panel.
(Default)
Disabled Disables sound of the front operation panel.
TOSHIBA PC Health Monitor
The TOSHIBA PC Health Monitor application proactively monitors a
number of system functions such as power consumption, battery health
Qosmio F750 Series
User's Manual 4-21

Toshiba Qosmio F750 Series Specifications

General

Brand	Toshiba
Model	Qosmio F750 Series
Category	Laptop
Language	English