User’s Manual 4-47
Operating Basics
FM tuner
This section describes how to connect the FM tuner antenna to the
computer's FM tuner jack.
Using the FM tuner
To connect the FM tuner antenna, follow the steps as detailed below:
1. Opening the card reader's door.
2. Plug the FM tuner antenna into the FM tuner jack.
3. To start FM tuner software, please see the "Listen to radio" below.
Listen to radio
This section describes how to set up and use of FM software to listen to
radio.
Setting FM software
1. Activate Media Center.
2. Click in the following order: click Tasks -> settings -> TV -> Set Up TV
Signal.
3. Follow the wizard to select your region.
4. Select I will manually configure my TV signal in the Automatic TV
Signal Setup screen.
5. Select Antenna in the Select Your TV Signal screen.
Starting FM software
1. Activate Media Center.
2. To launch the FM software, scroll to Music and then click radio -> FM
Radio.
Some models are equipped with a modem jack or FM antenna port.
To Next Page
Loading...
Need help?
General